Bu Pixhawk 3DR şirketinin mühendisleri tarafından kurulmuş mRobotics tarafından Amerika’da üretilmiştir. x2.1 versiyonu Pixhawk’ın daha küçük ve kutusuz olan versiyonudur. Pixhawk ile aynı güçtedir ve daha güncel sensörler kullanır. GPS ve güç modülü dahildir.
Paket içeriği:
1 Adet Pixhawk x2.1 Rev 2
1 Adet mRo GPS u-Blox Neo-M8N Dual Compass LIS3MDL+ IST8310
1 Adet Güç modülü ACSP 4 Assembled w/ XT60
1 Adet “Developer/Advanced” kablo aksamı (içeriği aşağıdadır)

[Assembled, Tested, Supported, & Shipped from California]

All Bundles are shipping now!

The mRo X2.1 Rev. 2 is the reduced version of PixHawk1 with better sensors and more flexibility. This board will “work out of the box” with PX4 and Ardupilot.

With mRo you don’t have to buy and pay for an autopilot pilot that includes cables and accessories that you might not use. Maybe you need a bare board for a replacement, maybe you don’t need the pin headers soldered, maybe you want to save time, maybe you need everything, who knows? We give you the flexibility to choose what you really need/want and save some money in the way, we won’t judge!

Developer/Advanced Bundle option includes:
1 x SanDisk Ultra micro SD Card (8GB)
1 x USB Micro Cable
1 x MRC0253 150mm USB Micro to [4 Pins JST-GH]
2 x MRC0206 150mm for GPS/Telemetry Radios
1 x MRC0205 100mm [4 Pins JST-GH] cable for I2C Accessories
1 x MRC0250 150mm X2.1 for Safety Switch and Status LED
1 x MRC0251 100mm X2.1 for Power module
1 x MRC0252 150mm X2.1 for Buzzer
1 x MRC0221 150mm [4 Pins JST-GH] to [4 2.54mm Female Headers] for programming
2 x MRC0202 150mm [6 Pins JST-GH] to [6 2.54mm Female Headers] for multiple solutions
1 x Servo connector to Spektrum Satelite

Microprocessor:

32-bit STM32F427 Cortex M4 core with FPU
168 MHz/256 KB RAM/2 MB Flash
32 bit STM32F103 failsafe co-processor
Sensors:
Invensense ICM-20602 3-axis accelerometer/gyroscope
Invensense MPU-9250 3-axis accelerometer/gyroscope/magnetometer
MEAS MS5611 barometer
Interfaces:
5x UART (serial ports), 2x with HW flow control.
1x CAN
Spektrum DSM / DSM2 / DSM-X® Satellite compatible input up to DX8 (DX9 and above not supported)
Futaba S.BUS® compatible input and output
PPM sum signal
RSSI (PWM or voltage) input
I2C® (Via GPS port)
SPI
2 x ADC inputs

Externally mounted microUSB port

Resources:

Docs
3D Files (Step)
Wiki

 

Yorum Yap

Lütfen yorum yazmak için oturum açın ya da kayıt olun.

Orjinal Pixhawk mRo x2.1 Rev 2

  • Ürün Kodu: Pixhawk mRo x2.1 Rev 2
  • Stok Durumu: 1
  • ₺1.652,00

  • Vergiler Hariç: ₺1.400,00

Etiketler: Pixhawk